ARID-Dry® Corrosion Protection for Industrial Storage
and Surface Coatings
- Temporary Humidity Control (continued)
 
         
 

Typical component options include:

  • Unit-Mounted Filters, Options Include:
    - 10% Permanent Washable 2" Thick Industrial
    - 30% 2" (standard) Pleated Throw Away
    - 55% to 65% 4" Cartridge Throw away
    - 99.97% HEPA 12" Cartridge
  • G-90 16-Gauge Galvanized Double-Wall Construction with Insulation
  • Cooling Coil and Heating Coil Options
  • Direct-Fired Natural-Gas, Electric or Propane Reactivation Systems
  • Skid or Trailer Mounted
  • Full Protective Enclosure
  • Integrated Control System with 10-Point Operational Function Display
  • Shipping Covers for All Inlets and Outlets
  • Packaged Refrigeration System Options
  • Packaged Generator System Options

Climate by Design International (CDI) builds the largest- capacity mobile dehumidifier available. Systems utilize natural gas, propane, or electric reactivation.

 

Climate by Design International (CDI), ARID-Dry mobile desiccant dehumidifiersprovide temporary humidity control for painting and coating, surface preparation and industrial condensation prevention.

When drying interior spaces, humidity control is crucial. An ARID-Dry mobile dehumidifier increases your productivity and profitability. The advantages of using large capacity mobile dehumidifiers with your projects are many. You can get more consistent drying cycles, faster and more consistent drying times. It's also the most effective system on the market, outperforming refrigeration and convection-style heat-drying methods.

ARID-Dry skid and trailer mounted units are the leading solutions available for quickly and efficiently removing ambient water vapor from air. Useful in surface preparation, painting and coating and industrial condensation prevention, ARID-Dry is the best-in-class dryer available.

Industrial Condensation Prevention
Many industrial companies use chilled water to remove heat from various processes. As the air or process is cooled below the ambient dewpoint, condensation can occur. Temporary or permanent desiccant dehumidifiers can eliminate the condensation. Often, this results in a higher quality part or reduced cycle time, allowing parts to be produced faster.

Utility Boiler Long-Term Storage
If a utility or industrial boiler or generator is idled for long periods of time, corrosion can result. Corrosion is caused when elevated ambient dewpoint air contacts the metal surfaces.Temporary or permanent desiccant dehumidifiers can reduce the ambient dewpoint, which prevents corrosion. Large boiler/generators and ancillary components can be protected for long periods by providing dry air blankets to protect equipment.

Painting and Surface Coatings
Many applications for painting coatings require low humidity to ensure industrial coatings can bond properly to surfaces. Ambient dewpoints can cause condensation on cool, large metal surfaces. Temporary dehumidification can eliminate the potential for condensation, allowing SPC contractors to blast and paint during the most extreme conditions.

ARID-Dry is more thermodynamically efficient because there's no change-of-phase necessary. It's simple design makes it highly reliable, while our superior construction makes the system dependable day-in and day-out in the most demanding environments. Our intelligent microprocessor even makes using ARID-Dry equipment easy to monitor!

 
         
  Click here for page three of ARID-Dry Corrosion Protection for Industrial Storage and Surface Coatings brochure.